|
SPECIFICATIONS |
|
Model Size ABL |
7" |
8" |
10" |
12" |
14" |
16" |
18" |
20" |
24" |
|
Stroke |
5.5" |
5.5" |
5.5" |
5.5" |
5.5" |
5.5" |
5.5" |
5.5" |
5.5" |
|
No. of Stroke per min. |
100 - 120 |
100 - 120 |
85 - 100 |
85 - 100 |
75 - 85 |
75 - 85 |
60 - 85 |
60 - 85 |
60 - 85 |
|
Electric Moter Required |
1 H.P. |
1 H.P. |
1.5 H.P. |
2 H.P. |
2 H.P. |
3 H.P. |
5 H.P. |
7.5 H.P. |
7.5 H.P. |
|
R. P. M. |
1440 |
1440 |
1440 |
1440 |
1440 |
1440 |
960 |
960 |
960 |
|
Blade Size |
12" - 14" |
14" - 16" |
16 - 18" |
18" - 20" |
20"- 22" |
22" - 24" |
24" - 26" |
28" - 30" |
30" - 36" |
|
Capacity of Round Bar |
7" |
8" |
10" |
12" |
14" |
16" |
18' |
20" |
24" |
|
Capacity of Square Bar |
5" |
5 1/2" |
8" |
10" |
11" |
13" |
14" |
15" |
18" |
|
Weight (in qtl.) |
3.5 |
3.5 |
5.25 |
5.3 |
7 |
7 |
10 |
11 |
12 |
| |
SALIENT FEATURE: |
Saw Frame : This is rigid construction & runs in prismatic guide ensuring a parallel cut. This cut takes place on the draw stroke & hydraulically lifted out of contact with the workpiece on the forward stroke to prevent wear or the blade & cut out metals of all kinds & strength. |
|
Feed : Two leavers are provided at the pot one regulators the rate of feed while the other enabled the blow slide to be raised or forwarded hydraulically bow raised automatically & motor switeched off on completion of the cut. |
|
Bed: The bed is of large produiction provided with guide ways for the vice for clamping the material vice is of rigid construction . One jaw remains fixed & the other can be adjusted according the material to be cut. |
|
Electrical Equipment : A direct on line push button starter can be fitted which incorporates & adjustable trip machanism which stops the machine as soon as the blade is clear from the work non productive time is reduced to minimum. |
|
Drive : Power is supplied by a suitable electric motor through Vee-Belts which are full adjustable for tension all drive mechanism being totally enclosed. |
|
Speed : The Incorporation of two speed driving mechanism allows for the most suitable speed to selected for material being cut. |
|
Coolant : The Coolant tank is totally enclosed in the machine base & speed pump supplies coolant to the saw blade through a stay put pipe & top. |
